Transfer Reduction Driven Gear: Assembly

WARNING: This page is about a different car, the 2012 Subaru Outback and 2012 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.

Install the new ball bearing (large) to reduction driven gear using the ST.
ST 499277100 REMOVER
NOTE:
- Use a new ball bearing.
- Install to the splines inside transfer reduction driven gear shaft.
  
  Fig 1: Identifying Ball Bearing (Large) With Reduction Driven Gear
  Courtesy of SUBARU OF AMERICA, INC.
Install the new ball bearing (small) to reduction driven gear.
NOTE: Use a new ball bearing.

ST 499277100 REMOVER

Fig 2: Identifying Ball Bearing (Small) With Reduction Driven Gear
Courtesy of SUBARU OF AMERICA, INC.