Reduction Driven Gear: Assembly

WARNING: This page is about a different car, the 2012 Subaru Outback and 2012 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.

Using the ST, install the ball bearing to bearing retainer.
ST 398177700 INSTALLER
NOTE:
- Use a new ball bearing.
- Make sure to install the ball bearing in the right direction.
- Apply CVTF to the press-fitting area.
  
  Fig 1: Identifying Ball Bearing On Bearing Retainer
  Courtesy of SUBARU OF AMERICA, INC.
Using the ST, install the reduction driven gear.
ST 499277200 INSTALLER

Fig 2: Identifying Reduction Driven Gear With Installer
Courtesy of SUBARU OF AMERICA, INC.