LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2011 >> Outback R >> Repair and Diagnosis >> External Pages >> Different car >> Section 75 (Intake Induction (H4SO)) >> Air Intake Boot >> Removal

Air Intake Boot: Removal

WARNING: This page is about a different car, the 2012 Subaru Outback and 2012 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the cover (A) and clip (B) from air intake boot assembly.
    Fig 1: Identifying Cover And Clip Of Air Intake Boot Assembly
    G06648482Courtesy of SUBARU OF AMERICA, INC.
  2. Loosen the clamp (A) which connects the air intake boot assembly and air cleaner case.
  3. Loosen the clamp (B) which connects the air intake boot assembly and throttle body.
    Fig 2: Identifying Air Intake Boot Clamps
    G06648483Courtesy of SUBARU OF AMERICA, INC.
  4. Disconnect the blow-by hose and remove the air intake boot assembly.
scientia non olet · About LEMON Manuals