Rear Regulator and Motor Assembly: Inspection
WARNING: This page is about a different car, the 2012 Subaru Outback and 2012 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect the motor connector.
- Apply battery voltage between the motor connector terminals and check the motor operation.
Courtesy of SUBARU OF AMERICA, INC.
Terminal No. Inspection conditions Specification 1 (+) - 4 (-) Apply battery voltage between terminals. Increase 4 (+) - 1 (-) Apply battery voltage between terminals. Decrease - If the inspection results in improper operation, replace the rear regulator and motor assembly.