LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2011 >> Outback R >> Repair and Diagnosis >> External Pages >> Different car >> Section 123 (Wiper And Washer Systems) >> Wiper Blade >> Assembly >> Front

Wiper Blade: Assembly: Front

WARNING: This page is about a different car, the 2012 Subaru Outback and 2012 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
  1. Insert the wiper rubber onto the blade so that the stopper is in the position shown in the figure.
    Fig 1: Locating Wiper Rubber Stopper
    G06653526Courtesy of SUBARU OF AMERICA, INC.
  2. Make sure the wiper rubber is securely fastened to the pull stopper (A).
Fig 2: Pulling Stopper
G05957762Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals