Room Light: Removal

WARNING: This page is about a different car, the 2012 Subaru Outback and 2012 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect the ground cable from battery.
Remove the room light.
1. Release the claws and remove the cover.
2. Remove the screws.
  
  Fig 1: Locating Room Light Cover Claws
  Courtesy of SUBARU OF AMERICA, INC.
3. Disconnect the connector and remove the room light and bulb.
  
  Fig 2: Disconnecting Room Light Connector
  Courtesy of SUBARU OF AMERICA, INC.