LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2011 >> Outback R >> Repair and Diagnosis >> External Pages >> Different car >> Section 121 (Lighting System) >> License Plate Light >> Removal >> Sedan Model

Sedan Model

WARNING: This page is about a different car, the 2012 Subaru Outback and 2012 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the ground cable from battery.
  2. Remove the trunk lid trim. Refer to TRUNK ROOM TRIM .
  3. Remove the trunk lid garnish. Refer to TRUNK LID GARNISH .
  4. Disconnect the connector and remove the bulb socket.
    Fig 1: Disconnecting Bulb Socket And Connector
    G06653483Courtesy of SUBARU OF AMERICA, INC.
  5. Remove the license plate light.
    Fig 2: Removing License Plate Light
    G06653484Courtesy of SUBARU OF AMERICA, INC.