LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2011 >> Outback R >> Repair and Diagnosis >> External Pages >> Different car >> Section 112 (Airbag System (Service Information)) >> Airbag Connector >> Procedure >> Passenger's Airbag Module

Passenger's Airbag Module

WARNING: This page is about a different car, the 2012 Subaru Outback and 2012 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
  1. How to disconnect:
    CAUTION: When pulling the slide lock or disconnecting connector, be sure to hold the connector, not the harness.
    1. Push the slide lock (A) in the direction of arrow.
    2. With the slide lock pushed, disconnect the connector.
    Fig 1: Pushing Passengers Airbag Module Slide Lock
    G06653084Courtesy of SUBARU OF AMERICA, INC.
  2. How to connect:
    CAUTION: Be sure to insert the connector in until it is locked. Then pull it gently to make sure that it is locked.

    Holding the connector, push it in securely until a clicking sound is heard.

    Fig 2: Pushing Passengers Airbag Module Slide Lock In
    G05003907Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals