Immobilizer Antenna: Removal

WARNING: This page is about a different car, the 2012 Subaru Outback and 2012 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect the ground cable from battery.
Remove the steering column cover.
1. Remove the screws by turning the steering wheel to right and left.
  
  Fig 1: Turning Steering Wheel To Right And Left
  Courtesy of SUBARU OF AMERICA, INC.
2. Release the claws and remove the steering column lower cover.
  
  Fig 2: Identifying Steering Column Lower Cover And Claw
  Courtesy of SUBARU OF AMERICA, INC.
3. Separate the steering column upper cover and steering upper cover, and remove the steering column upper cover.
  
  Fig 3: Identifying Steering Column Upper Cover And Steering Upper Cover With Claws
  Courtesy of SUBARU OF AMERICA, INC.
Remove the immobilizer antenna.
CAUTION: Do not apply excessive force to remove the immobilizer antenna and lock. Otherwise they may be broken because those parts are the products made of a plastic.
1. Disconnect the connector and remove the screw.
2. Remove the ignition illumination light and release the claws, then detach the immobilizer antenna.
  
  Fig 4: Removing Immobilizer Antenna And Claws
  Courtesy of SUBARU OF AMERICA, INC.