Front Outer Handle: Installation

WARNING: This page is about a different car, the 2012 Subaru Outback and 2012 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.

Before installation, check the following items.
- Rod is free from deformation.
- Grease is applied sufficiently to rod joints.
If grease is insufficient, add it as necessary before assembling the rod.
Install each part in the reverse order of removal.

Tightening torque:

Refer to "COMPONENT" of "General Description". Refer to , DOOR LOCK ASSEMBLY , COMPONENT, General Description.