LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2011 >> Outback R >> Repair and Diagnosis >> External Pages >> Different car >> Section 101 (Security And Locks) >> Body Integrated Unit >> Removal

Body Integrated Unit: Removal

WARNING: This page is about a different car, the 2012 Subaru Outback and 2012 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the ground cable from battery.
  2. Remove the instrument panel lower cover. Refer to INSTRUMENT PANEL LOWER COVER .
  3. Remove the body integrated unit.
    CAUTION: Be careful to keep water and other foreign materials away from body integrated unit.
    1. Remove the harness clip and connector.
    2. Remove the bolts, and remove the body integrated unit.
      Fig 1: Locating Body Integrated Unit Bolt
      G06653942Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals