Section 95 (Starting/Charging Systems (H4SO)): Starter: Installation

WARNING: This page is about a different car, the 2012 Subaru Outback and 2012 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.

Install in the reverse order of removal.

NOTE: For the MT model, a bolt is used in place (A).

Tightening torque:

50 N.m (5.1 kgf-m, 36.9 ft-lb)

Fig 1: Identifying Starter Mounting Bolt (View 2 Of 2)

Courtesy of SUBARU OF AMERICA, INC.

Tightening torque:

10 N.m (1.0 kgf-m, 7.4 ft-lb)

Fig 2: Identifying Starter Connector And Starter Terminal

Courtesy of SUBARU OF AMERICA, INC.