Front Lateral Link: Assembly
WARNING: This page is about a different car, the 2012 Subaru Outback and 2012 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
- Before assembly, inspect the following items and replace any faulty part with a new one.
- Visually check the front lateral link for damage and deformation.
- Visually check the bushing for abnormal cracks, fatigue or damage.
- Visually check the dust cover on the ball joint for damage.
- Using the ST, press the bushing into place.CAUTION: Make sure to press the bushing straight in.
PREPARATION TOOL:
ST-A & ST-B: INSTALLER & REMOVER (20299AE000)