LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2011 >> Outback Premium, Automatic CVT >> Repair and Diagnosis >> External Pages >> Different car >> Section 82 (Manual Transmission And Differential) >> General Description >> Preparation Tool >> General Tool

General Tool

WARNING: This page is about a different car, the 2012 Subaru Outback and 2012 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
TOOL NAME REMARKS
Circuit tester Used for measuring resistance.
TORX® bit T70 Used for installing and removing the differential gear oil drain plug.
Spring pin remover Used for removing and installing the spring pin. (3 - 3.3 mm)
Socket driver (TORX® 45 size, tamper resistant type) Used for removing and installing interlock plate.
Sling chain Used for removing and installing transmission.
  • Length: 0.8 - 1 m (2.6 - 3.3 ft)
  • Load capacity: 1.2 t (2646 lb) or more
  • Diameter: 6 mm (0.24 in) or 6.3 mm (0.25 in)
  • Chain external width: 23.5 mm (0.93 in) or less
  • Chain internal width: 8.5 mm (0.33 in) or more
Screw shackle Used for removing and installing transmission.
  • Load capacity: 250 kg (551 lb) or more
  • Use two pieces.
scientia non olet · About LEMON Manuals