LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2011 >> Outback Premium, Automatic CVT >> Repair and Diagnosis >> External Pages >> Different car >> Section 112 (Airbag System (Service Information)) >> Driver's Airbag Module >> Installation

Driver's Airbag Module: Installation

WARNING: This page is about a different car, the 2012 Subaru Outback and 2012 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
  • Refer to CAUTION  of "General Description" before handling the airbag module. .
  • Do not allow harness and connectors to interfere or get tangled up with other parts.
  1. Before installation, inspect the following items and replace any faulty part with a new one.
    • Airbag module is cracked or deformed.
    • Harness and/or connector is cracked, deformed or open.
    • Harness wire is exposed.
    • The steering wheel is in the way, making it difficult to install the airbag module.
    • The clearance between the driver's airbag module and steering wheel is not constant.
  2. Install each part in the reverse order of removal.

Tightening torque: 

10 N.m (1.0 kgf-m, 7.4 ft-lb) 

scientia non olet · About LEMON Manuals