LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2011 >> Outback Premium, Automatic CVT >> Repair and Diagnosis >> External Pages >> Different car >> Section 112 (Airbag System (Service Information)) >> Curtain Airbag Module >> Removal >> Outback Model

Outback Model

WARNING: This page is about a different car, the 2012 Subaru Outback and 2012 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: Refer to CAUTION  of "General Description" before handling the airbag module. .
  1. Turn the ignition switch to OFF.
  2. Disconnect the ground cable from battery and wait for at least 60 seconds before starting work.
  3. Remove the roof trim. Refer to ROOF TRIM .
  4. Remove the curtain airbag module assembly.
CAUTION:
  • Be careful not to damage the curtain airbag module during removal.
  • Never open the curtain airbag module before activation. Never reuse the deployed curtain airbag module.
  • Remove the modules in order starting from the vehicle front.
  1. Remove all bolts and clips, and remove the curtain airbag module assembly.
    Fig 1: Identifying Curtain Airbag Module Assembly With Bolt
    G06653153Courtesy of SUBARU OF AMERICA, INC.
  2. Disconnect the curtain airbag module connector.
Fig 2: Disconnecting Curtain Airbag Module Connector
G06653154Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals