Side Airbag Module

WARNING: This page is about a different car, the 2012 Subaru Outback and 2012 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.

How to disconnect:
CAUTION: When pulling the slide lock or disconnecting connector, be sure to hold the connector, not the harness.
1. Move the slide lock (A) in the direction of arrow and hold it.
2. While holding the slide lock (A) in place, pull the connector (B) to the direction of arrow.
Fig 1: Moving Slide Lock
Courtesy of SUBARU OF AMERICA, INC.
How to connect:
CAUTION: Be sure to insert the connector in until it is locked. Then pull it gently to make sure that it is locked.

Holding the connector, push it in securely until a clicking sound is heard.

Fig 2: Connecting Side Airbag Module Connector
Courtesy of SUBARU OF AMERICA, INC.