LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2011 >> Outback Premium, Automatic CVT >> Repair and Diagnosis >> External Pages >> Different car >> Section 112 (Airbag System (Service Information)) >> Airbag Connector >> Procedure >> Airbag Control Module

Airbag Control Module

WARNING: This page is about a different car, the 2012 Subaru Outback and 2012 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
  1. How to disconnect:
    1. Push the lock lever plate (A).
    2. While holding down the lock lever plate (A), pull the lever toward you.
    Fig 1: Pulling Lever
    G06653081Courtesy of SUBARU OF AMERICA, INC.
  2. How to connect:
    CAUTION: Be sure to insert the connector in until it is locked. Then pull it gently to make sure that it is locked.

    Insert the connector and push the lock lever in securely.

scientia non olet · About LEMON Manuals