Front Bushing

WARNING: This page is about a different car, the 2012 Subaru Outback and 2012 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.

Put an alignment mark on the front arm based on the gap of bushing intermediate plate for front bushing.
CAUTION: Always put an alignment mark for aligning the position on bushing installation.

Fig 1: Identifying Alignment Mark
Courtesy of SUBARU OF AMERICA, INC.
Using the ST and a press, remove the front bushing.
PREPARATION TOOL:

ST: INSTALLER & REMOVER SET (927680000)

Fig 2: Removing Front Bushing Using ST
Courtesy of SUBARU OF AMERICA, INC.