LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2011 >> Outback Limited >> Repair and Diagnosis >> External Pages >> Different car >> Section 84 (Continuously Variable Transmission) >> Extension Case >> Removal

Extension Case: Removal

WARNING: This page is about a different car, the 2012 Subaru Outback and 2012 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the transmission assembly from vehicle body. Refer to , REMOVAL , Automatic Transmission Assembly.
  2. Remove the front wheel speed sensor. Refer to , REMOVAL , Front Wheel Speed Sensor.
  3. Remove the harness clip, and remove the extension case.
    NOTE: The total number of extension case mounting bolts is ten.
    Fig 1: Identifying Extension Case Mounting Bolts
    G06654498Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals