Throttle Body: Installation
WARNING: This page is about a different car, the 2012 Subaru Outback and 2012 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
Install in the reverse order of removal.
NOTE:
Use a new gasket.
Tightening torque:
8 N.m (0.8 kgf-m, 5.9 ft-lb)
Courtesy of SUBARU OF AMERICA, INC.
NOTE:
Align the clamp hole with the protrusion of the air intake boot assembly.
 Courtesy of SUBARU OF AMERICA, INC.
|
Tightening torque:
Clamp (A), (B)
3 N.m (0.3 kgf-m, 2.2 ft-lb)
 Courtesy of SUBARU OF AMERICA, INC.
|