LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2011 >> Outback Limited >> Repair and Diagnosis >> External Pages >> Different car >> Section 73 (Fuel Injection Fuel Systems (H4SO)) >> Manifold Absolute Pressure Sensor >> Removal

Manifold Absolute Pressure Sensor: Removal

WARNING: This page is about a different car, the 2012 Subaru Outback and 2012 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the ground cable from battery.
    Fig 1: Disconnecting Ground Cable From Battery
    G07909690Courtesy of SUBARU OF AMERICA, INC.
  2. Remove the air intake boot assembly. Refer to AIR INTAKE BOOT .
  3. Disconnect the connector from the manifold absolute pressure sensor and remove the manifold absolute pressure sensor from throttle body.
Fig 2: Locating Manifold Absolute Pressure Sensor Connector And Bolts
G06648314Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals