Fuel Injector: Removal

WARNING: This page is about a different car, the 2012 Subaru Outback and 2012 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.

Release the fuel pressure. Refer to RELEASING OF FUEL PRESSURE , PROCEDURE, Fuel.
Disconnect the ground cable from battery.

Fig 1: Disconnecting Ground Cable From Battery
Courtesy of SUBARU OF AMERICA, INC.
Open the fuel filler lid and remove the fuel filler cap.
Remove the intake manifold. Refer to INTAKE MANIFOLD , REMOVAL, Intake Manifold.
Remove the bolts securing the fuel gallery to intake manifold.

Fig 2: Locating Fuel Gallery RH And Fuel Injector Bolts
Courtesy of SUBARU OF AMERICA, INC.
Remove the fuel injector while lifting up the fuel gallery.

Fig 3: Removing Fuel Injector

Courtesy of SUBARU OF AMERICA, INC.