Intake Duct: Assembly

WARNING: This page is about a different car, the 2011 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.

Install the wastegate control solenoid valve and air control hose to the intake duct.
- Use new O-rings.
- When tightening the boost control solenoid valve, check that it is securely seated.
Tightening torque:

4 N.m (0.4 kgf-m, 3.0 ft-lb)

Fig 1: Locating Wastegate Control Solenoid Valve Mounting Screw
Courtesy of SUBARU OF AMERICA, INC.
Install the vacuum hose (A) and vacuum hose (B) from intake duct.

Fig 2: Identifying Vacuum Hose (A) And Vacuum Hose (B)

Courtesy of SUBARU OF AMERICA, INC.