LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2011 >> Outback Limited >> Repair and Diagnosis >> External Pages >> Different car >> Section 101 (Security And Locks) >> Body Integrated Unit >> Installation

Body Integrated Unit: Installation

WARNING: This page is about a different car, the 2012 Subaru Outback and 2012 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.

Install each part in the reverse order of removal.

Tightening torque: 

Body integrated unit: 7.5 N.m (0.76 kgf-m, 5.5 ft-lb) 

NOTE: Make sure that there are no differences from the contents of the current settings after installation. Refer to READ CURRENT DATA .
scientia non olet · About LEMON Manuals