Forced Drive
If the glass lid does not operate or the sunroof motor is not supplied with power, move the glass lid using the hexagon wrench.
Width across flat 5 mm (0.20 in)
CAUTION:
After a forced operation, make sure to perform an initialize operation. Refer to
, INITIALIZE OPERATION , OPERATION, Sunroof Control System.
- Remove the spot map light. Refer to SPOT MAP LIGHT .
- Insert the hexagon wrench securely until it touches the motor shaft edge.
- Turn the hexagon wrench, and move the glass lid.
- Turning right, the glass lid open.
- Turning left, the glass lid close.CAUTION: Be careful not to damage the adjacent parts with the rod end when moving the glass lid with the hexagon wrench.