Hydraulic Pressure: Notes
WARNING: This page is about a different car, the 2012 Subaru Outback and 2012 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
- To measure hydraulic pressure correctly, be sure to complete all the items in "INSPECTION", prior to performing the measurement. Refer to , INSPECTION , General Diagnostic Table.
- Do not leave the valve of pressure gauge closed or hold the steering wheel at lock for 5 seconds or more in any case, this can damage the oil pump.
- Before attaching a pressure gauge, place cloth at locations where fluid is expected to spill. Wipe off any split fluid completely after the measurement.