LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2011 >> Legacy R >> Repair and Diagnosis >> External Pages >> Different car >> Section 77 (Brake System) >> Stop Light Switch >> Adjustment >> Clearance Adjustment

Clearance Adjustment

WARNING: This page is about a different car, the 2012 Subaru Outback and 2012 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
  1. Loosen the lock nut, and adjust the stop light switch position until the clearance (A) between the threaded end of the stop light switch and stopper becomes 0.8 mm (0.031 in). Then, tighten the lock nut.
  2. Tighten the lock nut.
    Fig 1: Checking Clearance Between Threaded End Of Stop Light Switch And Stopper
    G07915694Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals