LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2011 >> Legacy R >> Repair and Diagnosis >> External Pages >> Different car >> Section 77 (Brake System) >> Rear Brake Pad >> Removal

Rear Brake Pad: Removal

WARNING: This page is about a different car, the 2012 Subaru Outback and 2012 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
  1. Lift up the vehicle, and then remove the rear wheels.
  2. Remove the rear brake pad.
  1. Remove the bolts and remove the brake hose bracket.
  2. Remove the caliper bolt, and raise and hold the caliper body.
    NOTE: Do not disconnect the brake hose from the caliper body.
    Fig 1: Locating Brake Hose Bracket And Bolts
    G07915634Courtesy of SUBARU OF AMERICA, INC.
  3. Remove the brake pad from support.
    Fig 2: Removing Brake Pad From Support
    G07915635Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals