LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2011 >> Legacy R >> Repair and Diagnosis >> External Pages >> Different car >> Section 75 (Continuously Variable Transmission) >> Reduction Driven Gear >> Removal

Reduction Driven Gear: Removal

WARNING: This page is about a different car, the 2012 Subaru Outback and 2012 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the transmission from the vehicle. Refer to , REMOVAL , Automatic Transmission Assembly.
  2. Remove the extension case. Refer to , REMOVAL , Extension Case.
  3. Remove the rear drive shaft. Refer to , REMOVAL , Rear Drive Shaft.
  4. Remove the transfer clutch assembly. Refer to , REMOVAL , Transfer Clutch.
  5. Remove the transfer reduction driven gear assembly. Refer to , REMOVAL , Transfer Reduction Driven Gear.
  6. Remove the intermediate case. Refer to , REMOVAL , Intermediate Case.
  7. Remove the forward clutch assembly. Refer to , REMOVAL , Forward Clutch Assembly.
  8. Remove the snap ring.
    Fig 1: Identifying Clutch Assembly Without Snap Ring
    G06654605Courtesy of SUBARU OF AMERICA, INC.
  9. Remove the reduction driven gear assembly.
    Fig 2: Identifying Reduction Driven Gear Assembly
    G06654606Courtesy of SUBARU OF AMERICA, INC.
  10. Remove the straight pin.
    Fig 3: Locating Straight Pin (View 1 Of 2)
    G06654607Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals