Select Lever: Disassembly

Remove the gasket and plate COMPL.

Fig 1: Identifying Gasket And Plate COMPL
Courtesy of SUBARU OF AMERICA, INC.
Insert a flat tip screwdriver with a thin tip under the connector and disconnect each connector from the plate COMPL.

Fig 2: Locating Plate COMPL Connector Terminals
Courtesy of SUBARU OF AMERICA, INC.
Remove the spacer bolt and remove the plate guide COMPL.

Fig 3: Identifying Plate Guide COMPL And Spacer Bolt
Courtesy of SUBARU OF AMERICA, INC.
Remove the shift lock clamp, spring A, select lever rod, lock plate cushion, and bushing.

Fig 4: Identifying Shift Lock Clamp, Spring A, Select Lever Rod, Lock Plate Cushion, And Bushing
Courtesy of SUBARU OF AMERICA, INC.
Remove the detent spring.

Fig 5: Identifying Detent Spring
Courtesy of SUBARU OF AMERICA, INC.
Remove the shift lock solenoid unit.

Fig 6: Removing Shift Lock Solenoid Unit
Courtesy of SUBARU OF AMERICA, INC.
Raise the claw of connector.

Fig 7: Raising Claw Of Connector
Courtesy of SUBARU OF AMERICA, INC.
Disconnect the terminals of the SPORT mode switch, "P" range switch, and shift lock solenoid from the connector, using a flat tip screwdriver with a thin tip.

Fig 8: Identifying P Range, Shift Lock And Sport Mode Switch Connector Terminals
Courtesy of SUBARU OF AMERICA, INC.
Remove the grommet.

Fig 9: Identifying Grommet
Courtesy of SUBARU OF AMERICA, INC.
Pull out the spring pin.

Fig 10: Locating Spring Pin
Courtesy of SUBARU OF AMERICA, INC.
Pull out the arm assembly, remove select lever COMPL, and remove bracket arm detent and bushing.

Fig 11: Identifying Arm ASSY, Selector Lever COMPL, Bracket Arm Detent And Bushing
Courtesy of SUBARU OF AMERICA, INC.
Remove the rod detent and spring detent from the bracket arm detent.

Fig 12: Identifying Rod Detent, Spring Detent And Bracket Arm Detent
Courtesy of SUBARU OF AMERICA, INC.