Intake Manifold: Disassembly
- Disconnect the engine ground terminal from the intake manifold.
Courtesy of SUBARU OF AMERICA, INC.
- Remove the ignition coil and ignitor assembly. < Ref. to
REMOVAL
, Ignition Coil and Ignitor Assembly. >
- Remove the throttle body. < Ref. to
REMOVAL , Throttle Body. >
- Remove the EGR valve. < Ref. to
REMOVAL , EGR Valve. >
- Remove the plug cord stay.
Courtesy of SUBARU OF AMERICA, INC.
- Remove the fuel pipe protector LH.
Courtesy of SUBARU OF AMERICA, INC.
- Remove the fuel pipe protector RH.
Courtesy of SUBARU OF AMERICA, INC.
- Remove the harness band (B) which holds the engine harness to the fuel injector pipe, and disconnect connectors (A) from the fuel injector.
Courtesy of SUBARU OF AMERICA, INC.
- Remove the purge control solenoid valve. < Ref. to
REMOVAL
, Purge Control Solenoid Valve. >
- Remove the bolts holding the engine harness to the intake manifold, and remove the engine harness.
Courtesy of SUBARU OF AMERICA, INC.
- Remove the bolts which hold fuel injector pipe on the intake manifold as shown in the figure.
- RH side
Courtesy of SUBARU OF AMERICA, INC.
- LH side
Courtesy of SUBARU OF AMERICA, INC.
Courtesy of SUBARU OF AMERICA, INC.
- Remove the fuel injectors from the fuel injector pipe
- Disconnect the quick connector which hold the fuel injector pipe RH to the fuel pipe.
Courtesy of SUBARU OF AMERICA, INC.
- Disconnect the quick connector which hold the fuel injector pipe LH to the fuel pipe.
Courtesy of SUBARU OF AMERICA, INC.
- Remove the fuel injector pipe RH and LH.
- Remove the bolts which hold fuel pipe onto intake manifold.
Courtesy of SUBARU OF AMERICA, INC.
- Remove the fuel pipe from intake manifold.