LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2011 >> Impreza Outback Sport, Standard >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Fuel Injection System (Fuel Systems) (H4SO) >> Crankshaft Position Sensor >> Removal

Crankshaft Position Sensor: Removal

  1. Disconnect the ground cable from battery.
    Fig 1: Disconnecting Ground Cable From Battery
    G07662740Courtesy of SUBARU OF AMERICA, INC.
  2. Remove the bolt which secures crankshaft position sensor to oil pump.
    Fig 2: Identifying Crankshaft Position Sensor Connector
    G07662741Courtesy of SUBARU OF AMERICA, INC.
  3. Remove the crankshaft position sensor, and then disconnect the connector from it.
    Fig 3: Identifying Crankshaft Position Sensor And Connector
    G07662742Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals