Propeller Shaft: Installation

Insert the sleeve yoke into the transmission and attach center bearing to body.

Fig 1: Bolts Which Hold Center Bearing To Vehicle Body
Courtesy of SUBARU OF AMERICA, INC.

Tightening torque:

52 N.m (5.30 kgf-m, 38.3 ft-lb)
Align the alignment marks (A), and connect the flange yoke and rear differential.

Fig 2: Alignment Marks On Flange Yoke And Rear Differential
Courtesy of SUBARU OF AMERICA, INC.

Tightening torque:

31 N.m (3.16 kgf-m, 22.9 ft-lb)
Install the heat shield cover.
Install the center exhaust pipe.
Install the rear exhaust pipe and muffler.
Lower the vehicle.
Connect the battery ground terminal.