Outer Mirror Assembly: Inspection
- Disconnect the outer mirror connector.
- Apply battery voltage between the outer mirror connector terminals and check the mirror operation.
- Model without mirror heaterCONNECTOR TERMINALS REFERENCE CHART
Switch position Terminal No. OFF - UP 6 (+) and 3 (-) DOWN 3 (+) and 6 (-) LEFT 7 (+) and 3 (-) RIGHT 3 (+) and 7 (-) - Model with mirror heaterCONNECTOR TERMINALS REFERENCE CHART
Switch position Terminal No. OFF - UP 7 (+) and 3 (-) DOWN 3 (+) and 7 (-) LEFT 8 (+) and 3 (-) RIGHT 3 (+) and 8 (-) Folding 6 (+) and 3 (-) Unfolding 3 (+) and 6 (-)
- Model without mirror heater
- If it does not operate normally, replace the outer mirror assembly.