LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2010 >> Outback R >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission >> Rear Drive Shaft >> Installation

Rear Drive Shaft: Installation

  1. Select shims. Ref. to ADJUSTMENT , Transfer Clutch.
  2. Install the drive plate and driven plate.
  3. Insert the rear driveshaft into the center differential assembly.
  4. Combine the extension case, and then install the rear vehicle speed sensor. Ref. to INSTALLATION , Extension Case.
  5. Install the transmission assembly to the vehicle. Ref. to INSTALLATION , Automatic Transmission Assembly.
scientia non olet · About LEMON Manuals