LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2010 >> Outback R >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 8 (Continuously Variable Transmission) >> Reduction Driven Gear >> Assembly

Reduction Driven Gear: Assembly

WARNING: This page is about a different variant/trim than selected.
  1. Using the ST, install the ball bearing to bearing retainer.

    ST 398177700 INSTALLER

    NOTE:
    • Use a new ball bearing.
    • Make sure to install the ball bearing in the right direction.
    • Apply CVTF to the press-fitting area.
    Fig 1: Identifying ST 398177700 Installer
    G06654613Courtesy of SUBARU OF AMERICA, INC.
  2. Using the ST, install the reduction driven gear.

    ST 499277200 INSTALLER

    Fig 2: Installing Reduction Driven Gear
    G06654614Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals