LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2010 >> Outback R >> Repair and Diagnosis >> External Pages >> Different car >> Section 99 (Seats) >> Power Seat System >> Removal >> Power Seat Switch

Power Seat Switch

WARNING: This page is about a different car, the 2012 Subaru Outback and 2012 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the seat from vehicle. Refer to , REMOVAL , Front Seat.
  2. Remove the seat side cover OUT.
    1. Release the claw in the rear section of the seat side cover.
    2. Release the claw in the upper section of the seat side cover.
    3. Remove the clip and release the claw in the front section of the seat side cover
    4. Disconnect the power seat switch and lumber switch connectors and remove the seat side cover OUT.
      Fig 1: Removing Seat Side Cover OUT Claws
      G06653137Courtesy of SUBARU OF AMERICA, INC.
  3. Remove the screws to remove the power seat switch assembly.
    Fig 2: Locating Power Seat Switch Assembly Screws
    G05957933Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals