LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2010 >> Outback R >> Repair and Diagnosis >> External Pages >> Different car >> Section 114 (Airbag System (Service Information)) >> Front Door Impact Sensor >> Installation

Front Door Impact Sensor: Installation

WARNING: This page is about a different car, the 2012 Subaru Outback and 2012 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: Do not reuse the bolt and nut.

Always replace with the specified new bolts and nuts.

  1. Before installation, inspect the following items and replace any faulty part with a new one.
    • The front door impact sensor or connector is damaged.
    • Front door inner panel area is deformed.
    • Side airbag is deployed.

    Tightening torque: 

    Front door impact sensor: 7.5 N.m (0.76 kgf-m, 5.5 ft-lb) 

  2. Install each part in the reverse order of removal.
scientia non olet · About LEMON Manuals