LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2010 >> Outback R >> Repair and Diagnosis (Single Page) >> Brakes >> Traction Control >> Anti-Lock Brake System - Vehicle Dynamics Control (VDC) >> ABS Sequence Control >> Operation >> Abs Sequence Control With SUBARU Select Monitor

Abs Sequence Control With SUBARU Select Monitor

NOTE: In the event of any trouble, the ABS sequence control will not operate.
  1. Connect the Subaru Select Monitor.
  2. Follow the procedures displayed in the Subaru Select Monitor to execute the following.
    1. When using a brake tester, press the brake pedal pad with a force of 1,000 N (102 kgf, 225 lbf).
    2. When using a pressure gauge, press the brake pedal so that the pressure gauge indicates 3,500 kPa (36 kgf/cm2 , 511 psi).
  3. The brake system being operated is displayed on the Subaru Select Monitor.
scientia non olet · About LEMON Manuals