Turbine Speed Sensor 1: Installation

WARNING: This page is about a different car, the 2012 Subaru Outback and 2012 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.

Install the turbine speed sensor 1.
Tightening torque:

7 N.m (0.7 kgf-m, 5.2 ft-lb)
Connect the turbine speed sensor 1 connector.

Fig 1: Identifying Turbine Speed Sensor 1 Connector
Courtesy of SUBARU OF AMERICA, INC.
Install the front exhaust pipe. Refer to FRONT EXHAUST PIPE .
Lower the vehicle.
Connect the ground cable to battery.