Reduction Driven Gear: Installation
WARNING: This page is about a different car, the 2012 Subaru Outback and 2012 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
- Set the range select lever to the "P" range.
- Use a plastic hammer to install reduction driven gear assembly.
- Select the reduction gear shims. Refer to , ADJUSTMENT , Reduction Driven Gear.
- Join the transmission case and the extension case, and then install the rear vehicle speed sensor. Refer to , INSTALLATION , Extension Case.
- Install the transmission assembly to the vehicle. Refer to , INSTALLATION , Automatic Transmission Assembly.