Check Power Seat Switch
WARNING: This page is about a different car, the 2012 Subaru Outback and 2012 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
Measure resistance between terminals while operating each switch.
- Driver's seat
| Switch position | Terminal No. | Specification |
|---|---|---|
| Slide forward | 7 and 14 8 and 13 |
Less than 10 Ω |
| Slide rearward | 7 and 13 8 and 14 |
Less than 10 Ω |
| Tilt up | 7 and 2 8 and 1 |
Less than 10 Ω |
| Tilt down | 7 and 1 8 and 2 |
Less than 10 Ω |
| Lifter up | 7 and 5 8 and 6 |
Less than 10 Ω |
| Lifter down | 7 and 6 8 and 5 |
Less than 10 Ω |
| Reclining forward | 7 and 3 8 and 4 |
Less than 10 Ω |
| Reclining rearward | 7 and 4 8 and 3 |
Less than 10 Ω |
- Passenger's seat
| Switch position | Terminal No. | Specification |
|---|---|---|
| Slide forward | 7 and 13 8 and 14 |
Less than 10 Ω |
| Slide rearward | 7 and 14 8 and 13 |
Less than 10 Ω |
| Reclining forward | 7 and 4 8 and 3 |
Less than 10 Ω |
| Reclining rearward | 7 and 3 8 and 4 |
Less than 10 Ω |
Replace the switch if the inspection result is not within the standard value.