Intake Manifold: Disassembly

WARNING: This page is about a different car, the 2012 Subaru Outback and 2012 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.

Remove the engine harness from intake manifold. Refer to , ENGINE HARNESS , COMPONENT, General Description.
Remove the fuel injector pipe and hose.

Fig 1: Locating Fuel Injector Pipe And Hose Clamp Bolts (LH Side)
Courtesy of SUBARU OF AMERICA, INC.

Fig 2: Locating Fuel Injector Pipe And Hose Clamp Bolts (RH Side)
Courtesy of SUBARU OF AMERICA, INC.
Remove the fuel pipe assembly.

Fig 3: Locating Fuel Pipe Assembly Nuts (1 Of 2)
Courtesy of SUBARU OF AMERICA, INC.

Fig 4: Locating Fuel Pipe Assembly Nuts (2 Of 2)
Courtesy of SUBARU OF AMERICA, INC.
Remove the EGR valve. Refer to , REMOVAL , EGR Valve.
Remove the manifold absolute pressure sensor. Refer to , REMOVAL , Manifold Absolute Pressure Sensor.
Remove the purge control solenoid valve. Refer to PURGE CONTROL SOLENOID VALVE .