Fuel Pump Control Unit: Removal

WARNING: This page is about a different car, the 2012 Subaru Outback and 2012 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect the ground cable from battery.
Remove the trunk trim panel assembly-side RH. (Sedan model) Refer to REAR QUARTER TRIM .
Remove the right side rear quarter trim. (OUTBACK model) Refer to REAR QUARTER TRIM .
Remove the fuel pump control unit.
- Sedan model
  
  Fig 1: Locating Fuel Pump Control Unit Bolt And Nut (Sedan Model)
  Courtesy of SUBARU OF AMERICA, INC.
- OUTBACK model
  
  Fig 2: Locating Fuel Pump Control Unit Bolt And Nut (OUTBACK Model)
  Courtesy of SUBARU OF AMERICA, INC.
Disconnect the connector from fuel pump control unit.

Sedan model

Fig 3: Locating Fuel Pump Control Unit Connector (Sedan Model)
Courtesy of SUBARU OF AMERICA, INC.
OUTBACK model

Fig 4: Locating Fuel Pump Control Unit Connector (OUTBACK Model)
Courtesy of SUBARU OF AMERICA, INC.