Engine Control Module (ECM): Removal

WARNING: This page is about a different car, the 2012 Subaru Outback and 2012 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect the ground cable from battery.
Remove the glove box lid assembly. Refer to GLOVE BOX .
Disconnect the connectors from ECM.

Fig 1: Locating Glove Box Lid Assembly
Courtesy of SUBARU OF AMERICA, INC.
Remove the ECM from vehicle.

Fig 2: Locating ECM Screws
Courtesy of SUBARU OF AMERICA, INC.