Propeller Shaft: Installation

Insert the sleeve yoke into the transmission and attach center bearing to body.
Tightening torque: 52 N.m (5.3 kgf-m, 38.4 ft-lb)

Fig 1: Locating Propeller Shaft Bolts
Courtesy of SUBARU OF AMERICA, INC.
Align the alignment marks and connect the flange yoke and rear differential.
Tightening torque: 31 N.m (3.2 kgf-m, 22.9 ft-lb)

Fig 2: Identifying Alignment Marks On Flange Yoke And Rear Differential
Courtesy of SUBARU OF AMERICA, INC.
Install the heat shield cover.
Tightening torque: 18 N.m (1.8 kgf-m, 13.3 ft-lb)
Install the center exhaust pipe.
Install the rear exhaust pipe and muffler.
Lower the vehicle.