LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2010 >> Forester X, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 16 (Front Suspension System) >> Wheel Alignment >> Inspection >> Caster

Wheel Alignment: Inspection: Caster

WARNING: This page is about a different car, the 2009 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.
  1. Place the front wheel on the turning radius gauge. Make sure the ground contact surfaces of the front and rear wheels are at the same height.
  2. Set the adapter into the center of wheel, and then set the wheel alignment gauge.
    Fig 1: Identifying Front Wheel On Turning Radius Gauge
    G05956670Courtesy of SUBARU OF AMERICA, INC.
  3. Measure the caster angle in accordance with the operation manual for wheel alignment gauge.
    CASTER ANGLE SPECIFICATION

    Model Caster
    All models 5°25'
scientia non olet · About LEMON Manuals