LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2010 >> Forester X, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 28 (Lighting System) >> Front Height Sensor >> Installation

Front Height Sensor: Installation

WARNING: This page is about a different car, the 2009 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.
  1. Align the bracket clip with the front crossmember installation hole, and install the bracket.
  2. Install in the reverse order of removal.

Tightening torque: 

7.5 N.m (0.76 kgf-m, 5.5 ft-lb) 

NOTE: Perform reinitialization if the front vehicle height sensor was removed. Refer to PROCEDURE , Auto Headlight Beam Leveler System .
scientia non olet · About LEMON Manuals