LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2009 >> Tribeca Base >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission 5AT >> Rear Drive Shaft >> Installation

Rear Drive Shaft: Installation

  1. Select the shim. Ref. to ADJUSTMENT , Transfer Clutch.
  2. Install drive plate and driven plate.
  3. Insert the rear drive shaft into the center differential assembly.
  4. Combine the extension case, and then install the rear vehicle speed sensor. Ref. to INSTALLATION , Extension Case.
  5. Install the transmission assembly to the vehicle. Ref. to INSTALLATION , Automatic Transmission Assembly.
scientia non olet · About LEMON Manuals